Arcam P-7 High Performance 7 Channel Amplifier
$5,000.00 $1,989.00
FMJ P7 7-Channel Surround Amplifier – Technical Specifications ![]() |
![]() |
All specification shown below are typical, unless otherwise stated. Please note that Arcam’s policy is one of continuous improvement. We therefore reserve the right to change the material, dimensions, specifications or design of our products shown or referred to herein at any time and without prior notice. Illustrations used in our leaflets or on our website are intended as a guide only. E&OE 10/03. |
|
All measurements are with 230V / 50 Hz mains power
|
|
Continuous Power Output | |
Watts Per Channel: All channels driven | |
20Hz – 20Hz, 8ohms, 150WPC |
1.05kW total
|
20Hz – 20Hz, 4ohms, 230WPC |
1.62kW total
|
Watts Per Channel: All channels driven | |
8ohms, 160WPC 4ohms, 230WPC 3.2ohms, 300WPC |
|
Peak Output Current Capability | |
>22 amps per channel | |
|
|
Total Harmonic Distortion | |
At any level up to rated power, into 4 or 8 ohms <0.05% 20Hz – 20Hz, typically <0.005% at 1kHz |
|
Frequency Response | |
+/- 0.2dB 20Hz – 20Hz -1 dB at 1Hz and 100kHz |
|
Residual Hum and Noise | |
Typically -112dB ref full power | |
Voltage Gain | |
X28.3 (1 volt input gives 100W / 8 ohms output) | |
Input Impedance | |
22 kohms in parallel with 470 pF | |
Output Impedance | |
50 milliohms at 20Hz, 1kHz 120 milliohms at 20Hz | |
Power Requirements | |
115 or 230 VAC, 50 / 60Hz, 3kW maximum via heavy duty IEC mains inlet. A soft start system eliminates large currents at switch on. |
|
General | |
Dimensions W/D/H mm. inc. feet. | 433x460x180 |
Weight (packed) | 35kg |
In Stock
Description
Floor Demo