Atmosphere X Series Power Cable EUPHORIA (Level 3)

$2,995.00$4,270.00

Atmosphere X Euphoria Power Cables are specifically designed to reduce all noise in your system including digital grunge by shunting it to ground inductively through a complex multi cable geometry and UEF Shielding and Active Shielding for the quietest power cord in the Atmosphere X lineup. All conductors, wall and IEC connectors, shields and the same Swiss-Made power supply found in our Galileo SX power cords are then treated with our amazing Blue Fuse treatment process, and this gives Atmosphere X Euphoria a lower noise floor than is possible from the more conventional power supply and geometries found in Excite. Additionally, Euphoria’s geometry gets a boost from one more pure Silver Air String for a sound that has increased air and finesse. Another trickle-down performance upgrade from Galileo SX is the inclusion of a Ground Plane encased in the carbon fiber tube. And there’s an option to ground Euphoria’s Swiss power supply and shileds to a Synergistic Research Active Ground Block, this is perhaps the most significant upgrade that dramatically reduces your system’s noise floor for increased dynamics and emotional involvement in your music. As with Galileo SX custom tuning is achieved through the use of a Gold UEF Tuning Module that adds warmth and bloom or when not connected the cable has a leaner balance. Of course, the choice of whether or not to use the Gold Tuning Module is yours, giving you the option to custom tune the sound of Euphoria to complement your system.

Clear
SKU: N/A Category: Brand:

Description

UEF Cell

Swiss made power supply.

Each Atmosphere Level 3 Power Cable contains a Swiss-made power supply and Quantum capacitors to generates the 30 Volt DC bias necessary for Active Shielding, eliminating the need for messy external wiring and cumbersome wall warts. Performance is further enhanced by the introduction of UEF technology built into the power supply and cable shielding for an incredibly low noise floor.

Red and Gold Tuning

Redefining refinement.

The Atmosphere Level 3 Power Cables active shielding is voiced with a single Red UEF Active Circuit. Also, included is a Gold, passive UEF Tuning Module. The UEF Tuning Module is connected to the cable shields and contours the sound of your cables by changing the way your cables resonate. By altering the resonance between signal and ground conductors you take control of the sonic balance of your cables and in the process, the overall sound of your system.

The Red Active Circuit completes the Active circuit and must be in place in order to achieve the highest performance.

Gold Tuning Module’s Sonic Characteristics (Optional use):

  • Warmth
  • Liquidity
  • Musicality

    UEF Matrix Shield with Graphene

    Matrix shielding.

Atmosphere X began when we started exploring ways to improve our UEF Shielding by applying UEF Technology first developed for our BLUE Fuses to Atmosphere Series cables. By placing UEF Tech in a grid pattern on the shields of Atmosphere cables we were able to dramatically lower the noise floor with a surprising increase in musicality or the subjective enjoyment of music. We then began a painstaking double-blind 6-month trial where we would listen to seemingly identical cables marked with random alphanumeric codes to conceal differing patterns of UEF Tech inside each prototype cable and record which options elicited the strongest responses among a control group of listeners. By gauging actual emotional response, we were able to isolate grid patterns that better conveyed the essence of music. We would then build on these patterns to find additional patterns that performed better than the last. In this way, our latest shielding technology is highly evolved from anything we have ever done before with each shield pattern selected for its ability to not only lower a cable’s noise floor but to also convey a greater sense of musical enjoyment. The net result is the most advanced shielding technology we have ever developed with each model in the Atmosphere X Series gaining a special shielding pattern that best compliments the geometries of ALIVE, EXCITE and EUPHORIA.

Atmosphere X Euphoria Power Cable
Specification

3 each 12 awg. Copper Matrix Alloy:

  • Dielectric: Modified PE
  • Shielding: Braided Ground Plane Technology
  • Geometry: 2 channel

  3 each Silver Air String:

  • Silver Air Strings: 99.9999% pure mono crystal silver conductor
  • 4 separate conductors RCA / 8 separate conductors XLR
  • Dielectric: PTFE Air (sealed)
  • Shielding: Ground Plane Technology
  • Hand crafted in our California factory

1 each Active Shielding UEF Cell:

  • Modified Swiss-made DC bias Power Supply
  • UEF: Graphene treated pcb
  • SR Quantum Capacitors
  • Dielectric: PTFE
  • Shielding: Ground Plane Technology
  • Housing: Carbon Fiber Cylinder

1 each Red Active Module:

  • For lowest noise floor, completes Active bias circuit

1 each Gold UEF Tuning Passive Module:

  • Optional voicing for increased warmth, liquidity

Connectors:

  • Connector Input US: 1 each Synergistic Research G07 Pure Gold
  • Connector Input Int’l: 1 each Synergistic Research G07 Pure Gold Schuko
  • Connector Output US: Synergistic Research G07 Pure Gold IEC 15 amp and 20 amp connectors
  • Connector Output Int’l: Synergistic Research G07 Pure Gold IEC 15 amp and 20 amp connectors

 Build Notes:

  • 32 point-to-point hand soldered connections
  • Atmosphere Level 4 UEF Matrix Shielding: 2 different UEF coatings with Graphene are applied to UEF Cell, connectors and cabling and ground significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors and ground plane and UEF Cell also benefit from dampening effect that UEF provides
  • 1 Termination for Atmosphere Active Tuning Module (Red)

  • 1 Termination for Atmosphere UEF Passive Tuning Module (Gold)
  • Silver Solder: 4%
  • Hand build time: 2.5 hours
  • Quantum Tunneling: Before the Active power supply is incorporated all connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that lets electrons to flow more freely. This also allows the “Active Shielding” to work more efficiently yielding the maximum amount of low level information through the conductors and provides for the highest amount of realism in your music
  • Secondary UEF Blue Treatment originally developed for SR Blue Fuses
  • 5 day Burn-in: 2 step process
  • Hand crafted in our California factory