Chord Ultima Pre 2
SELECT OPTIONS:
Please call our store to purchase:
904-642-6677
ULTIMA PRE 2
Eight Input Preamplifier
Featuring unrivalled connectivity and minimal colouration, the ULTIMA PRE 2 can be the hub of your Hi-Fi system without taking anything away from the incoming signal.
DESCRIPTION
The fully modernised ULTIMA PRE 2 is built to complement stereo systems of the highest order and represents the finest Chord Electronics engineering inside and out.
Just as a preamplifier should, the ULTIMA PRE 2 adds nothing to the original waveform and instead preserves it with zero colouration. This is thanks to our latest advances in switch-mode power supply design, developed from aerospace technologies, and our ultra-low-noise proprietary solid-state circuitry which is both carefully shielded and equipped with premium system components. As a result, the ULTIMA PRE 2 is able to achieve unprecedented noise floor performance of -130dB, meaning your source will always sound like your source and nothing else.
Where connectivity is concerned, the ULTIMA PRE 2 has hi-fi systems (and more!) covered. Featuring eight inputs, four stereo pairs of XLRs for balanced connections and another four RCA for unbalanced connections, each of these can be gain-matched and individually selected. For outputs, a single stereo pair is available via XLR or RCA, to accommodate a single stereo amplifier such as the ULTIMA 5 or a pair of mono blocks such as the ULTIMA 3s. Naturally, headphone users are catered for, too, for personal and late-night listening with the addition of a high-resolution 6.35mm output on the front fascia.
Where system-triggering is important, (allowing the simultaneous start-up of connected equipment from a single button-press), the ULTIMA PRE 2 is equipped with three outputs which should be more than enough for most systems.
FEATURES
- HF Switch Mode Power Supply
- Blue Velvet ALPS Potentiometer
- Advanced Shielding Technology
- Fully Balanced Circuitry
- Analogue Signal Path
- Input/Output Buffering
- 4x Stereo RCA Inputs
- 4x Stereo XLR Inputs
- 1x Stereo RCA Output
- 1x Stereo XLR Output
- Convection Cooled
- Included Top Light Ring
- 12v Trigger On/Off Input/Output
- Solid Aluminium Chassis
INCLUDED ACCESSORIES
REVIEW & AWARDS
Chord Ultima Pre 2/Ultima 2
"Vocals swung from intimate to wild dervish in a few beats" - Andrew Everard
SPECIFICATIONS
Inputs & Outputs | 8 Stereo Inputs and 1 Stereo Outputs |
4x Stereo Balanced XLR Inputs – Line In 1, Line In 2, Line In 3, and Line In 4 | |
4x Stereo Unbalanced RCA Inputs – Line In 5, Line In 6, Tape 1, Tape 2 | |
1x Stereo Output – Either via Balanced XLR or Unbalanced RCA | |
2x Stereo Outputs – RCA unattenuated for recording loop | |
1x Stereo Balanced XLR AV Bypass Input | |
Frequency response | 10Hz – 200kHz +/- 3dB |
THD | 0.002% 20Hz – 20 kHz |
Signal to noise ratio | -102dB on all inputs |
Input Impedance | 100 kΩ |
Output impedance | 100Ω |
Input maximum voltage | 10V RMS |
Output maximum voltage | 17V RMS |
Selectable gain | x0.5, x1, x1.5, x2, x2.5, and x3 |
Channel separation | 100dB |
Operation voltage | 80-250V AC auto-switching |
Power consumption | 30W |
Dimensions Without Integra Legs | 420mm (w) x 355mm (d) x 133mm (h) |
Dimensions With Included Integra Legs | 480mm (w) x 355mm (d) x 173mm (h) |
Weight | 18kG |