1 4

Eversolo

Eversolo AMP-F2

Eversolo AMP-F2

$799.00 USD
$799.00 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.
Shipping Deliveries over $700 - Signature Required!

Ver todos los detalles
Dynamic Power Detailed Presentation

Dynamic Power Detailed Presentation

The AMP-F2, developed in collaboration between the Starke Sound team and the Eversolo team, is based on the innovative NS600 module created by the Starke Sound team. It boasts a high sampling rate of up to 600KHz. Simultaneously, it significantly reduces noise and enhances dynamic performance through the newly designed SAPS audio-specific switch power supply. It employs an efficient Class D amplification structure, cou-pled with optimized circuits to maximize audio quality. The AMP-F2 is bridgeable, allowing flexible configura-tion for 2-channel or mono-channel setups when needed.

Vigorous Output Bridged Support

Vigorous Output Bridged Support

The AMP-F2 is equipped with Starke Sound's NS600 amplifier module, each channel can output a con-stant 250W RMS (42) @ 1% THD+N. When bridged, it can support up to 450W RMS (22) with THD+N still below 1%. This ability to handle extremely low-impedance loads ensures ample energy even in large and challenging speaker setups, particularly during high-dynamic low-frequency outputs.

Accurate Sound Perfect Experience

Accurate Sound    Perfect Experience

The NS600 module employs PurePath™ Ultra-HD technology and advanced integrated feedback design, featuring high-speed gate driver error correction functions. This technology achieves ultra-low distortion across the entire audio frequency range, delivering perfect high-end audio quality.

PurePath™ Ultra-HD
Powerful Power Drive

Powerful Power Drive

Utilizing a 600W high-efficiency, low-ripple, low-EMI switch power supply, it delivers consistent and powerful output, extremely low noise, enhancing the overall dy-namic performance of the system.

Environmentally Friendly Low Power Consumption

Environmentally Friendly
Low Power Consumption

AMP-F2 has an extremely low standby power (0.5W) and idle power consumption (14W), com-plying with the European Union ErP standards.

Aluminum Body Shielding Design

Aluminum Body Shielding Design

Complete self-protection and anti-interference design to avoid disturbances from various electrical environments.

One-Touch Activation Seamless Control

One-Touch Activation Seamless Control

The AMP-F2 is equipped with standard 12V TRIGGER IN and TRIGGER OUT function, allowing it to be synchronized with other devices that support the standard TRIGGER interface for power on and off, using the USB to TRIGGER adapter cable provided with the AMP-F2, you can connect the USB Type A interface of the DMP-A6 to the TRIGGER IN of the AMP-F2 to achieve synchronization.

Specifications

Specifications

Basic Parameters

Output Power
145W RMS at 8 ohms (1% THD)
250W RMS at 4 ohms (1% THD)
280W RMS at 4 ohms (1% THD, BTL)
450W RMS at 2 ohms (1% THD, BTL)
Gain
21.5dB
Channel quantity
2
Amplifier type
Class D
Frequency Response
10Hz-20KHz - 1dB
Maximum output current per channel
16.5A/33A(Bridge)
Signal-To-Noise Ratio (SNR)
>110dB, "A" weighted at 4 ohm 250W
THD
0.003% 10W at 1KHz
Input Impedance (XLR)
22ΚΩ
Input Sensitivity
2.7V
Output terminals
2 pairs beryllium copper binding post custom made by Starke Sound
Output Impedance
0.1362(5 Hz to 100 kHz)
Minimum load impedance
0.8Ω
True balance circuit
Yes
Heat
65 BTU/hr
Power consumption
Standby ≤0.5W Idle ≤14W
Maximum 900W
Control option
12V trigger input & output
Cabinet
Aluminum (Black)
Input terminals
2-Channel RCA Input 2-Channel XLR Input
Input Impedance (RCA)
11ΚΩ
Size
270x228x80 (mm)