PS Audio · sub · House of Stereo
A foundation you can tune to your room.
Foundry F12 combines a sealed 12-inch driver with a 1,000-watt continuous amplifier and app-based DSP control. Choose a single subwoofer or a pair, then integrate its bass with your speakers and room.
Select Single or Pair and your finish before ordering. Wireless transmitter and stacking kit are separate accessories.
Foundry F12 Subwoofer
Output begins with the driver and enclosure
The 12-inch driver is designed for long excursion in a sealed enclosure, supported by an amplifier and a power supply specified separately at 1,800 watts. That supply figure is not the continuous audio-output rating. The manufacturer specifies 20 Hz at −6 dB in a ground-plane measurement; actual room response depends on placement and acoustics.
Foundry F12 Subwoofer
Integration is part of the product
The DSP app provides controls for equalization, delay, gain, and low-pass filtering. Connect through RCA or XLR, or use the supported high-level connection method described in the manual. An optional Foundry wireless transmitter handles the audio signal; the subwoofer still needs AC power. A pair can offer more placement choices, and the separate stacking kit allows a compatible two-subwoofer stack.
Make it work in your system
Thoughtful setup makes the difference.
Choose a location
Begin with practical placement options and compare response at the listening seat. Two subs provide additional positioning choices.
Blend with the mains
Set gain, crossover behavior, and delay using the supported DSP controls. Balance integration rather than simply raising bass level.
Choose the connection
Use the connection method appropriate to your amplifier or receiver. Wireless requires the compatible optional transmitter and AC power at the subwoofer.
The details that matter
Specifications
| Package options | Single: one F12 / Pair: two F12 subwoofers |
|---|---|
| Driver / enclosure | 12-inch driver / sealed enclosure |
| Amplifier | 1,000 W continuous |
| Power supply | 1,800 W rating |
| Low-frequency specification | 20 Hz at −6 dB, ground-plane |
| Maximum output | 113 dB at 2 m, ground-plane |
| Inputs | RCA, XLR, supported high-level input; optional wireless transmitter |
| Controls | App-based DSP: EQ, delay, gain, low-pass filtering |
| Dimensions per subwoofer | 14.75 W × 16.75 H × 17.5 D in; 18.125 D in with grille |
| Weight per subwoofer | 77 lb / 35 kg |
| AC supply | Automatic 120/230 V, 50/60 Hz |
Ratings are manufacturer specifications. Check the linked manual for complete operating conditions, regional requirements, and installation instructions.
Before you choose
Common questions
Is the price for one subwoofer or two?
Choose Single or Pair in the product options. The displayed price follows the selected package and finish.
Are wireless hardware and the stacking kit included?
No. The compatible wireless transmitter and the F12 stacking kit are separate accessories.
Keep researching.
Read the manufacturer’s owner’s guide (PDF)
