Audio-Technica ATN3600LE Replacement Stylus

This elliptical bonded stylus makes it easy to upgrade the sound quality of any turntable equipped with an ATN3600L or ATN3600LC conical stylus, such as the turntables in our popular AT-LP60X series.
Modeled after the venerable ATN3600L, which has sold by the millions and been trusted by countless music lovers for more than 50 years, the ATN3600LE features an elliptical stylus for enhanced sound quality while remaining reliable and easy to use.

ATN3600LE

Replacement Stylus

Overview

Replacement stylus for the Audio-Technica AT3600L cartridge.

This elliptical bonded stylus makes it easy to upgrade the sound quality of any turntable equipped with an ATN3600L or ATN3600LC conical stylus, such as the turntables in our popular AT-LP60X series. Modeled after the venerable ATN3600L, which has sold by the millions and been trusted by countless music lovers for more than 50 years, the ATN3600LE features a 0.3 x 0.7 elliptical stylus for enhanced sound quality while remaining reliable and easy to use.

Stylus Shape: Elliptical
Stylus Dimension: 0.3 x 0.7 mil
Stylus Life: Approx. 300 hours

Compatible Turntables

Audio-Technica turntables: AT-LP60X series, AT-LP60 series, AT-LP2D series, AT-PL300 series, AT-SB727, AT-SB2022, AT-LPGO-BT, AT-PL50.

Other brands: Consult the turntable’s user manual or contact the manufacturer.   

Features

• Replacement stylus for the Audio-Technica AT3600L cartridge
• 0.3 x 0.7 elliptical stylus provides an instant upgrade in sound quality for any turntable equipped with an ATN3600L or ATN3600LC conical stylus
• Compatible with these Audio-Technica turntables:* AT-LP60X series, AT-LP60 series, AT-LP2D series, AT-PL300 series, AT-SB727, AT-SB2022, AT-LPGO-BT, AT-PL50

* The ATN3600LE is compatible with turntables from other brands, as well. To confirm compatibility, consult the turntable’s user manual or contact the manufacturer.

To remove old stylus (needle), hold the cartridge in one hand, grasp the plastic stylus housing with thumb and forefinger, and pull away from the cartridge. The stylus assembly comes away at a slight angle, as indicated by the arrow.

To install replacement stylus, insert the new stylus assembly into the cartridge at a slight angle, so the hook at the end of the stylus fits into the slot in the cartridge body. The stylus assembly should click into place when fully seated on the cartridge. The stylus must be fully seated on the body for proper operation.