ADH® next generation
Class A analogue amplification works with Class D power delivery.
Questions? Call us (904) 642-6677 or visit our showroom at 3110 Beach Blvd. Jacksonville, FL 32207
Call our audio experts: (904) 642-6677
Devialet
Deliveries over $700 - Signature Required!
Couldn't load pickup availability
Devialet · Astra Dual
Two Astra amplifiers form a dual-mono system with 600 W per channel into 4Ω, configurable inputs and comprehensive phono and streaming facilities.

Astra combines a preamplifier, power amplifier, DAC, network streamer and MM/MC phono stage. Its machined aluminium chassis is 47 mm high.
Dual combines two Astra amplifiers in a configured two-chassis system, rated at 600 W per channel into 4Ω.
Class A analogue amplification works with Class D power delivery.
Select the exact supported passive-speaker profile to tailor signal processing to its behaviour.
Match the phono input to the cartridge and record equalization curve.
Integrates digital conversion with Devialet’s amplification architecture.
AirPlay, Google Cast, Spotify Connect, TIDAL Connect, UPnP and Roon Ready are integrated.
Assign inputs and outputs, set phono parameters and configure single- or multi-amplifier systems.
RCA connections are configurable: the listed maximum analogue and coaxial input counts are alternatives, not a promise that every maximum is available simultaneously. The configurator also supports mono/stereo pre-outs and active filtering.
For vinyl, set MM or MC operation, cartridge output, resistance and capacitance. RAM offers record-equalization adjustment, including the manufacturer’s thirteen curves. Use the cartridge maker’s specifications.
The supplied Astra Remote has a display and rotary volume control in 1 dB increments. It recharges through USB-C; the amplifier’s rear USB-C data port cannot charge it.
The Devialet app provides source selection, volume, balance, equalization, power modes and display-brightness adjustment. Astra supports daisy chaining up to eight units; the exact multi-amplifier arrangement must be configured for the speakers.
| Rated output | 2 × 600 W RMS / 4Ω; 2 × 300 W RMS / 8Ω |
|---|---|
| Peak output, 1 ms | 2,000 W |
| THD, 4Ω / 1 kHz | 0.001% at 10 W; 0.0004% at 100 W; 0.0005% at 600 W |
| Signal/noise figure | −117 dB, as published by Devialet |
| Output impedance, 1 kHz | 0.0057Ω |
| Damping factor, 1 kHz | 1,400 |
| Crosstalk | −100 dB, 300 W / 4Ω / 1 kHz |
| Bandwidth | DC–20 kHz ±0.1 dB; DC–80 kHz ±2.3 dB; DC–58 kHz ±1 dB; DC–88 kHz ±3 dB |
| Wi-Fi | Wi-Fi 6, 2×2, WPA3; b/g/n/ac/ax |
|---|---|
| Ethernet | RJ45, 100/1000 Mbps |
| Bluetooth | 5.3; AAC / SBC |
| USB | USB-C 2.0 data input |
| Coaxial digital | Up to 4 RCA, 75Ω; configurable |
| Optical digital | 2 TOSLINK |
| Analogue | Up to 2 stereo RCA; configurable line / MM / MC |
| Pre-out | Configurable mono / stereo |
| Speaker terminals | 4 mm banana, spade or bare wire |
| Speaker loads | 2–8Ω; short-circuit protection; active filtering available |
| DSP | 192 kHz / 32-bit |
|---|---|
| Digital & network input | Up to 192 kHz / 24-bit |
| USB input | Up to 384 kHz / 24-bit |
| Phono | MM / MC; 13 equalization curves and adjustable cartridge loading |
| Daisy chaining | Up to 8 devices |
| Width × depth × height | 386 × 386 × 47 mm |
|---|---|
| Weight | 7.2 kg per amplifier |
| Chassis | Machined aluminium block; anodized, laser-engraved, brushed and shot-peened |
| Supply | 100–240 V AC, 50/60 Hz |
| Maximum continuous input | 750 W per amplifier |
Passive loudspeakers, speaker cables and source components.
Use the exact supported speaker model. Devialet warns against substituting another speaker’s profile.
Yes, through the configurable pre-out. Plan the output assignment and filtering for the actual subwoofer.
No. Devialet identifies it as a data port; charge the remote from a suitable separate supply.
The dimensions and 7.2 kg weight are for each amplifier. A Dual package contains two units.
Use the supplied microfiber cloth while the unit is cool. Devialet advises against cleaning products and paper towels.
