Synergistic Research PowerCell 12 UEF SE
Synergistic Research PowerCell 12 UEF SE
PowerCell 12 UEF SE
See what condition your condition is in.
The PowerCell 12 UEF SE is more than your next generation power conditioner – it’s the heart of your audio system. With 10-gauge Silver Matrix point-to-point wiring and separate EM Cell filtration banks for the ultimate in component to component isolation and peak current delivery, 6 x UEF BLUE Duplexes, and utilizing Graphene, a near superconductor at room temperature, the PowerCell 12 UEF SE provides the purest and cleanest form of non-current-limiting power possible from today’s cutting edge components. Simply plug your entire system into the PowerCell 12 UEF SE to dramatically improve all areas of sound quality, guaranteed. Generating absolutely no heat or noise the PowerCell 12 UEF SE is perfect for all types of electronics including power-hungry mono block amplifiers. And with two separate Active EM Cell power banks feeding 6 UEF Black Duplexes each isolated one from another through direct 10-gauge Silver Matrix point-to-point wiring, your PowerCell 12 UEF SE isolates digital from analog components better than any other PowerCell line conditioner. Of course, our flagship model comes standard with our High Current Atmosphere Level 3 Active power cable and can be custom ordered with a High Current Galileo UEF power cord for the ultimate sound quality upgrade.
The PowerCell 12 UEF starts with a high carbon steel chassis treated with a UEF Coating that blocks EM and RFI interference and is designed to function as a superlative conduit for our new Ground Plane Technology.
Developed exclusively for the PowerCell 12 UEF, the ULF (Ultra Low Frequency) Field Generator connects directly to the PowerCell 12’s (6) duplexes through the (6) Active EM Cells. It’s designed to clean your electric power by re-clocking the A/C with a rich, low-frequency harmonic that overrides noise and hash found in most common 50-60 cycle A/C.
Six separate UEF electromagnetic cells with graphene, act like supercapacitors to increase peak current on demand, allowing your components to draw more power than they would normally when connected to the wall. This gives your system added dynamic headroom while filtering the AC, all completely outside the signal path.
PowerCell 12 UEF SE Specifications:
- All 10 awg. Silver Matrix point-to-point discrete wiring
Connector Output US:
- 12 each BLUE UEF Outlets (Two stage Quantum Treatment)
Connector Output International (EU/AU/UK):
- 12 each BLUE UEF Schuko outlets (Two stage Quantum Treatment)
- Graphene treatment throughout unit
- Internal “Active” power supply for biasing EM Cells
- 2nd generation Internal ULF (Ultra-low frequency) Generator to bias AC to the Earth’s Schumann Resonance for a dramatic drop in a system’s noise floor
- 2 each SR Power Transformers
- 8 each SR Quantum Capacitors in EM Cell power supply and ULF field generator
- High Carbon Steel/Aluminum “Ground Plane” chassis
- New 6 EM Cell topology acts like a ‘Super Capacitor’ to increase peak current on demand allowing components to draw more current than when connected directly to the wall for added dynamic headroom
Internal Active UEF EM Horizontal Plane Cell area:
- 640 square centimeters
- 5 x Internal Active UEF EM Folded Carbon Fiber Cell area: 2343.15 square centimeters total
- 1 each Neutrik 32 amp PowerCon
- 2 Isolated Output Banks; can be used to isolate analog from digital components
99.995% Pure Silver Ground Strap:
- 62 square centimeters
- 1 each special 10-gauge Atmosphere Level 3 Active PowerCell power cord that does not require a separate MPC, just plug and play like standard non-active power cords—no extra wires
Weight and Dimensions:
- 5.5″ x Width 17.5″ x Depth 13.5″
- 19 lbs.
Voltage and current Rating:
- Input rating US: 20amp/125v
- Input Rating International (EU/AU/UK): 16amp/250v
- US Version: Rating is limited by the US Outlet rating of 20amp/125v
- International(EU/AU/UK) Version: Rating is predicated upon the Schuko Outlet rating of 16amp/250v